Vision Art Aluminum Systems: Manufacturer Review and Catalogue
What is Vision Art Aluminum?
Vision Art Aluminum is a New Jersey based manufacturer and contractor of premium architectural aluminum systems, serving residential and commercial projects. The company operates from a showroom at 28 Valley Road, Suite 1, Montclair, New Jersey 07042, and lists its phone line as +1 (855) 656-5920 on its official website. Its working hours run Monday to Saturday, 9 a.m. to 5 p.m. The business was featured by Fox8 News in a magazine segment.
Vision Art Aluminum covers the full project chain: design, drawings and permits, manufacturing, and installation. Its service area is New Jersey and New York. The catalogue spans windows, doors, sunrooms, pergolas, curtain walls, aluminum composite panels, and frameless office partitions. The company positions itself in the high end residential and commercial segment rather than mass production.
What products does Vision Art Aluminum offer?
Vision Art Aluminum offers a multi line catalogue built around European system platforms. The window range includes tilt and turn windows on the ST70 insulated system (REHAU and VEKA), single hung windows on the HR4 and HRW4 series, and bi-fold windows. The door range covers pivot doors built on Reynaers systems, sliding doors on the S50 Next Generation platform, french doors, and bi-fold configurations.
Vision Art Aluminum also produces larger architectural assemblies. Its sunrooms use a four season build with a thermal aluminum frame and double glazed tempered Low-E glass. Pergolas come in two systems: the SkyFlow retractable pergola and the SkyBlade aluminum louver pergola, both motorised and remote controlled. The company further supplies curtain walls (a building facade system hung on the structure), aluminum composite panels for cladding, and frameless office partitions on the InterNo 42 series.
Windows and doors
The single hung window range carries a hurricane resistant variant. The HRW4 series holds Miami-Dade and Florida approval, with a design load rated at +70 and -80 pounds per square foot (psf) and a 9/16 inch thermal break. The sliding door range, on the S50 system, scales to a 129 inch height and a 26 foot width, with each panel rated to 800 pounds.
Sunrooms, pergolas, and partitions
The frameless office partition line uses the InterNo 42 series. It reaches a height of 12 feet, uses 1/2 inch glass, and reports sound transmission class (STC, a single number rating of how well a partition blocks sound) up to 37, with acoustic insulation up to 36 decibels. The four season sunroom adds a waterproof seal and is offered across New Jersey and New York.
Which suppliers and standards back the products?
Vision Art Aluminum builds on European system suppliers listed on its about page. The named partners are Schuco, Giesse, Reynaers, G-U, Siegenia, Rehau, and VEKA, drawn from Germany, Italy, and Belgium. These suppliers provide the profile platforms, hardware, and sealing systems used across the catalogue.
The supplier roster signals European engineering standards rather than a single in-house standard. The Miami-Dade and Florida approval on the HRW4 single hung series indicates the product passed a United States building code certification process for high wind regions. Buyers seeking a specific code rating should confirm the exact approval document for the model under consideration.
What does the catalogue look like at a glance?
Vision Art Aluminum publishes per product technical detail on its official site. The table below maps each main product line to its platform and a key verified specification.
| Product line | System / platform | Key verified spec |
| Tilt and turn windows | ST70 (REHAU, VEKA) | Hidden hinges, mosquito net, glass corner |
| Single hung windows | HR4 / HRW4 series | Miami-Dade approval, +70 / -80 psf, 9/16 in thermal break |
| Bi-fold windows | Custom made | Accordion fold; kitchen servery, pool house, terrace |
| Pivot doors | Reynaers system | Single, 2-panel, 3-panel; blinds-between-glass option |
| Sliding doors | S50 Next Generation | Up to 129 in high, 26 ft wide; 800 lbs per panel |
| Sunrooms | Four season build | Thermal frame, double glazed tempered Low-E glass |
| Pergolas | SkyFlow / SkyBlade | Motorised, remote controlled, four season |
| Frameless office partition | InterNo 42 series | Up to 12 ft, 1/2 in glass, STC up to 37 |
| Aluminum composite panel | Aluboard variant | Polyethylene or mineral filled core, fire resistance |
How does the ordering and installation process work?
Vision Art Aluminum runs a seven step process from first contact to handover. The sequence covers consultation, project planning, fabrication, and a factory trained installation crew. The company states that average installation runs about one week after town approval and manufacturing, scaled to project size.
- Initial consultation
- Zoom or in-person meeting
- Design concept
- Site inspection
- Drawings and permits
- Manufacturing
- Expert installation
The permit step matters for buyers timing a build. Drawings and town permits sit ahead of manufacturing, so the calendar depends on local approval speed, not only on the shop. The retractable pergola and louver pergola lines also serve commercial use, including year round restaurant dining.
What are the strengths and limitations?
Vision Art Aluminum pairs European system platforms with a single point full service model, covering design through installation. The verified specifications are concrete: the sliding door reaches a 26 foot width, and the single hung HRW4 holds Miami-Dade approval. The catalogue breadth, from windows to curtain walls and partitions, suits whole building projects rather than single item replacements.
Vision Art Aluminum has documented limits a buyer should weigh. The service area is New Jersey and New York only, so it does not present as a nationwide supplier. The founding year is not stated on the site, and a casement window does not have its own product page, appearing only as a window type. A blog title references a Google five star rating, but the score and review count are not verified in a primary record, so no rating figure is confirmed here.
Who is Vision Art Aluminum right for?
Vision Art Aluminum fits buyers in New Jersey and New York who want premium aluminum systems delivered as one design to install package. The supplier roster (Schuco, Reynaers, Rehau, and others) points to European engineering platforms across the range. The hurricane rated HRW4 single hung line and the large format S50 sliding door give documented options for high wind and oversized openings. Project timing hinges on the permit stage, which precedes manufacturing in the seven step flow. Buyers outside the New Jersey and New York service area, or those needing a stated founding history, would find those points unconfirmed and should verify current details directly with the company before deciding.
This content is for informational purposes only. Specifications, availability, and pricing may change. Verify current product details, certifications, and service coverage on the official seller page before purchasing.
Frequently Asked Questions
What is Vision Art Aluminum?
Vision Art Aluminum is a New Jersey based manufacturer and contractor of premium architectural aluminum systems. It operates from a Montclair showroom at 28 Valley Road, Suite 1, and serves residential and commercial clients across New Jersey and New York. The catalogue spans windows, doors, sunrooms, pergolas, curtain walls, composite panels, and frameless office partitions, with full design to installation service.
Where is Vision Art Aluminum located and what area does it serve?
Vision Art Aluminum is located at 28 Valley Road, Suite 1, Montclair, New Jersey 07042, where it keeps a showroom. The phone line is +1 (855) 656-5920, and working hours run Monday to Saturday, 9 a.m. to 5 p.m. The company serves New Jersey and New York and does not present itself as a nationwide supplier.
What products does Vision Art Aluminum make?
Vision Art Aluminum makes aluminum windows, doors, sunrooms, pergolas, curtain walls, aluminum composite panels, and frameless office partitions. The window range includes tilt and turn, single hung, and bi-fold types. The door range covers pivot, sliding, french, and bi-fold systems. Pergolas come in retractable SkyFlow and louver SkyBlade lines, both motorised and remote controlled.
Which European suppliers does Vision Art Aluminum work with?
Vision Art Aluminum lists European system partners on its about page: Schuco, Giesse, Reynaers, G-U, Siegenia, Rehau, and VEKA. These suppliers, based in Germany, Italy, and Belgium, provide the profile platforms, hardware, and sealing systems used across the catalogue. The roster signals European engineering standards behind the windows, doors, and larger architectural assemblies the company builds.
Is Vision Art Aluminum certified for high wind regions?
Vision Art Aluminum offers a single hung HRW4 series that holds Miami-Dade and Florida approval, indicating it passed a United States building code certification process for high wind areas. The model carries a design load rated at +70 and -80 pounds per square foot. Buyers should confirm the exact approval document for the specific model and opening before ordering.